• Holds objects 1" to 2.25" (25 to 57mm) in diameter. • Each clamp supports a safe working load of 25lbs (11 kilos). • 2 clamps support 50lbs (23 kilos). • Mounts easily with one #10 bolt or screw. • Mounting area: 2 3/4" x 7/8" (70x22mm).
• Holds objects 1" to 2.25" (25 to 57mm) in diameter. • Each clamp supports a safe working load of 25lbs (11 kilos). • 4 clamps support 100lbs (46 kilos). • Mounts easily with one #10 bolt or screw. • Mounting area: 2 3/4" x 7/8" (70x22mm).
• Holds objects from 5/8" to 1 3/8” (16 to 32mm) in diameter. • Each clamp supports a safe working load of 25lbs (11 kilos). • 2 clamps support 50 lbs (23 kilos). • Mounts easily with one #10 bolt. • Mounting area: 1 1/2" x 1 5/6" (38 x 47mm)
• Holds objects from 2 3/4" to 3 1/4" (70mm to 83mm) in diameter. • Each clamp supports a safe working load of 50lbs (23 Kilos). • Mounts easily with one 1/4" (6mm) bolt or screw. • Mounting area: 4 1/2” x 1 1/4” (114mm x 32mm).
• Holds tools and equipment from 1 3/4” to 2 1/2” (44 to 63mm) in diameter. • Each clamp supports a safe working load of 50lbs, with a break- strength of 150 lbs. • Mounts with two 1/4” bolts or screws. • Mounting area: 1” X 3.5” (25 x 89 mm) 1 Clamp Per Package
• Holds objects from 2.5" to 9.5" (64 to 240mm) in diameter. • Each clamp supports a safe working load of 50lbs (23 kilos). • 2 clamps support 100lbs (45 kilos). • Mounts with three #10 bolts or screws. • Mounting area: 6" x 7/8" (152 x 22mm).
• Holds objects from 1/2" to 7/8” (13 to 22mm) in diameter. • Use either #6 flathead screw or bolt and a small washer (Do Not Over-tighten). • Each clamp supports a safe working load of 13lbs (6 kilos). • 2 clamps support 26lbs (12 kilos). • Mounting Area: 1 3/8" x 1 1/8"
• Holds objects from 1/2" to 4.5" (13mm to 114mm) in diameter. • Each clamp supports a safe working load of 50lbs (23k). Break strength is 120lbs (55k). • Mounts easily with two 1/4" (6mm) bolts or #14 wood or sheet metal screws, plus washers.
Sometimes you need to lift a QUICK FIST Clamp away from a wall or deck. The QUICK FIST RISER provides a 1" lift.
Works with the following Clamps: Original QUICK FIST, MINI QUICK FIST, SUPER QUICK FIST, and the 3" QUICK FIST. Made of glass infused Nylon and are guaranteed against breakage for life. Blister card containing 2 Risers.
• Two 14’’ (356mm) separate straps hold round objects up to 15” (381mm) in diameter. • Holds equipment measuring up to 28” (711mm) in linear distance. • Each clamp supports a safe working load of 150lbs. (68 kilos) with a break-strength of 300lbs. (176 kilos). • Two clamps support 300lbs with a break-strength of 600lbs (272 kilos). • Each half of the clamp mounts with four #10 screws or bolts. • Mounting Area: 2” x 2” (51mm x 51mm)
Self-contained one piece ratchet clamp with 36" of lb. break test webbing.
Holds tools and equipment from 1/2" to 8" (12 to 203mm) in diameter (a broom to a SCUBA tank) on any vehicle.
One finger release.
Made of glass filled Nylon. Comes with a 5 year warranty (except the webbing).
Mounts with three bolts or screws (not provided).
Use the Original QUICK FIST Roll Bar Kit () to
mount a D cell flashlight, shovel, axes, or other tools
from 1” to 2.25" (25 to 57mm) in diameter to a roll
bar. 2 clamps support 50lbs (23 kilos).
Contents:
• 2ea. Original QUICK FIST Clamps
• 2ea. 2" Roll Bar Mounts
• 2 sets 1 3/4" snap-in inserts
Goto YOUDE to know more.
• 2 sets 1 1/2" snap-in inserts
• 2 sets 1" snap-in inserts
• All stainless steel hardware
Learn MoreUse the SUPER QUICK FIST Roll Bar Kit () to
mount a fire extinguisher, air tank, nitrous tank,
oxygen bottles or other tools from 2 1/2" to 9 1/2”
(64 to 241mm) in diameter to a roll bar. Safe
working load for the rubber Clamps is 50lbs each (45 kilos).
Contents:
• 2ea. SUPER QUICK FIST Clamps
• 2ea. 2" Roll Bar Mounts
• 2 sets 1 3/4" snap-in inserts
• 2 sets 1 1/2" snap-in inserts
• 2 sets 1" snap-in inserts
• All stainless steel hardware
Learn MoreFits Roll Bars or Bull Bars of 1", 1.5", 1.75" or 2" diameter (25,40,47 or 50mm)
Roll Bar Mounts and the inserts are made of glass filled nylon and guaranteed against breakage for life.
Contents:
• 2 each 2” (50mm) Roll Bar Mounts
• 2 each 1 3/4” (47mm) snap-in inserts
• 2 each 1 1/2” (40mm) snap-in inserts
• 2 each 1” (25mm) snap-in inserts
• All the necessary stainless steel hardware
Works with the following clamps:
Original QUICK FIST ()
Super QUICK FIST ()
Mini QUICK FIST ()
3” QUICK FIST ()
QUICK FIST Ratchet ()
If you want to learn more, please visit our website American Type Quick Release Hose Clamp.
Learn More