1
Mar.
27, 2025
During the application of sulfate electroplating tin additives, after the workpiece is treated for a certain period of time under reflow conditions (temperature at 260°C) after tin plating, purple or blue will appear on the surface of the coating.
Read More
2
Mar.
27, 2025
Trivalent chromium passivation agent for zinc plating
Trivalent chromium passivation agent for zinc plating is widely used due to its environmental protection, good corrosion resistance and simple wastewater treatment.
Read More
3
Mar.
27, 2025
Chemical nickel plating has a wide range of applications and can be plated on different substrates.
Different process flows should be adopted for different substrates.
Read More
4
Mar.
27, 2025
Reasons And Solutions For Boiler Air Nozzle Ash Leakage
The air nozzle of the boiler is one of the important components of the CFB boiler, which can control the oxygen content in the combustion chamber, help combustion to be more complete, and reduce emissions. However, some reasons may cause dust leakage from the air nozzle, which will affect the normal operation of the boiler. Here are some common causes of air nozzle dust leakage:
Read More
6
Mar.
27, 2025
Working Principle Of The CFB Boiler Economizer
The economizer is an important component of the CFB boilers, which can save energy, protect the environment, and extend the service life of equipment.
Read More
7
Mar.
27, 2025
Alkaline galvanizing and acid galvanizing
Alkaline galvanizing and acid galvanizing each have their advantages and disadvantages, and the choice of which is better depends on the specific application requirements and environmental conditions.
Read More
8
Mar.
27, 2025
The process of zinc electroplating
Pre-treatment: First, the workpiece needs to be pre-treated, including chemical degreasing, hot water washing, water washing, electrode degreasing and other steps, to ensure that the surface of the workpiece is clean and free of grease, so as to facilitate the subsequent electroplating process.
Read More
9
Mar.
27, 2025
The principle of passivation treatment can be explained by the thin film theory, that is, when the metal and oxidizing substances act, a very thin, dense, well-covered passivation film is generated on the metal surface.
Read More
10
Mar.
27, 2025
The main functions of passivation
Improvement of corrosion resistance: The core purpose of passivation is to significantly reduce the rate of corrosion of metals by forming a thin and stable oxide or passivation film on the metal surface, which effectively isolates the metal from direct contact with corrosive substances in the external environment (such as moisture, oxygen and chemicals).
Read More
11
Mar.
27, 2025
Electroplating nickel white mist fault treatment method
Analyze and adjust the concentration of each component in the plating solution, performing a Hall tank test if necessary to ensure that the parameters are in the normal range.
Read More
12
Mar.
27, 2025
How to choose the right type of electroplating rectifier
Clear plating requirements: Before purchasing electroplating rectifiers, first of all, you need to clarify your plating requirements. Different plating processes and products have different requirements for the equipment, such as plating thickness, plating uniformity, surface quality and so on. Therefore, you need to choose the right equipment according to your actual needs when purchasing, to avo
Read More
13
Mar.
27, 2025
HULKMAN Delivers Two VNA15 Narrow Aisle Electric Forklifts to Morocco
HULKMAN is excited to announce ready to delivery of two new VNA15 yellow narrow aisle electric forklifts to our valued client in Morocco. Designed to enhance operational efficiency and optimize warehouse space, these forklifts are a significant addition to our logistics solutions.
Read More
16
Mar.
27, 2025
17
Mar.
27, 2025
Types and Differences of Plating Freezers
Indirect freezing type electroplating freezer conveys water to the condenser of the chiller through the water pump to cool down, and then cools down the sulphuric acid in the electroplating tank through the heat exchanger. The advantage of this cooling method is that it is easy to install, has a longer service life, and the acid and alkali are not easy to corrode the chiller. The disadvantage is t
Read More
19
Mar.
27, 2025
The process of electroplating zinc-nickel alloy
Pre-treatment: First, the substrate is cleaned, degreased and descaled to ensure that the surface of the substrate is clean and free of pollution, which is conducive to the subsequent plating operation.
Read More
20
Mar.
27, 2025
The common faults in the process of electroplating zinc-nickel alloy and their causes
Grain oversize: Grain oversize is one of the common problems in the use of iron electroplated zinc-nickel alloy. The grain size is too large which leads to the reduction of the strength of the material and makes it easy to rupture and deform.
Read More