Product Description
Please visit our website for more information on this topic.
Hollow Anchor Rod
Product
I
ntroduction
Hollow anchor
bar
means a rod that transfers the structures or geotechnical load to a stable rock formations,
a
nchor bolt
consists
of
bar
, drill bit,
coupling, plate, grouting stopper and nut.
Widely used as an efficient anchoring means, in tunnel pre-support, slope, coast, mine, water conservancy projects, building foundation, roadbed reinforcement and geological diseases treatment such as landslip, crack, sink age. It's irreplaceable in narrow construction environment.
Hollow anchor
bar
is made of seamless tube with high strength.
Features of Hollow Grouting Anchor
Bar
:
• Fits standard Boomer, ROC and Mustang rigs.
• Particularly suitable for difficult ground conditions.
• A high rate of installation since drilling, placing and grouting can be performed in one single operation.
• Self drilling system eliminates the requirement for a cased borehole.
• Installation with simultaneous drilling and grouting possible.
•
Easy installation in all directions, also upwards.
• Suitable for working in limited space, height and in areas of difficult access.
• Simple post grouting system.
• Hot-dipped galvanizing for corrosion protection
Advantages and Characteristics
:
1.No casings required, because anchor bars can be drilled into loose soils without needing casings to support the boreholes.
2.Fast drilling and installation, because drilling, installation and grouting are in a single operation.
3.Both rope threads and trapezoid threads are robust and ideal for rotary-percussive drilling and ensuring a high level of bond with the borehole gout.
4.The hollow core not only serves for flushing during drilling, but also for grouting after
drilling.
5.Continuous threads ensure the bars can be cut and coupled at any point, or extended.
6.Different anchor bits are available for different ground conditions.
7.Duplex anti-crossion prosess ,hot-dip galvanized and epoxy coating system.
Product Specification
Anchor
Bar
R25N
R32N
R32S
R38N
R51L
R51N
T76N
T76S
Outside diameter
(mm)
25
32
32
38
51
51
76
76
Internal diameter
(mm)
14
19
16
19
36
33
52
45
Ultimate load
capacity
(KN)
200
280
360
500
550
800
1600
1900
Yield load
capacity
(KN)
150
230
280
400
450
630
1200
1500
Tensile strength,
Rp0.2
(N/mm2)
800
800
800
800
800
800
800
800
Yield strength,
Rp0.2
(N/mm2)
650
650
650
650
650
650
650
650
Weight
(Kg/m)
2.3
3.2
3.6
5.5
6.5
8.0
16.0
19.7
Thread type
(left-hand)
ISO
10208
ISO
1720
MAI
T76 Standard
R thread anchor bar or called rock rod, soil nail, which is a kind of threaded hollow bar, bar surface with an rope thread according to ISO 10208 & 1720. It was firstly invented by MAI on 1960S to solve the low construction speed on complicated underground works, nowadays; it is very popular all around the world.
Thread size: R25, R32, R38, R51, T76.
Thread standard: ISO10208, ISO1720 etc.
Anchor Plate
R25N
R32N
R32S
R38N
R51L
R51N
T76N
T76S
Dimention
(mm)
150*150
200*200
200*200
200*200
200*200
250*250
250*250
250*250
Thickness
(mm)
8
10
12
12
20
40
40
40
Hole diameter
(mm)
30
35
35
41
60
60
80
80
Weight
(KG/PC)
1.4
3
3.7
3.6
8.8
18.5
18
18
Cold deformed with geometry
Anchor Coupling
R25N
R32N
R32S
R38N
R51L
R51N
T76N
T76S
Outside diameter
(mm)
35
42
42
52
63
63
95
95
Length
(mm)
120
145
160or190
180
180
200
200
200
Weight
0.45
0.7
0.75
1.4
1.7
1.9
6.4
6.4
Machined steel coupling middle stop
The hollow bar is continuously threaded, it can be cut and coupled anwhere along its length.
The coupling enables direct end-to-end energy transmission between each bar, reducing losses and ensuring maximum percussive engergy at the drill bit.
Drill Bit
R25N
R32N
R32S
R38N
R51L
KSQ Technology are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
R51N
T76N
T76S
Diameter
(mm)
41,51
51,76,90
90,100,110,115,130
130,150,160,180,200
Hardened cross bit
(EX)
Hardened cross bit for loose to medium dense condition with small boulders.
Tungsten cross bit
(EXX)
TC cross bit for soft to medium rock for mations
Hardened button bit
(ES)
Hardened buuton bit for unconsolidated rock with boulders.
Tungsten carbon button bit
(ESS)
Button bit with TC inserts for medium rock for formations.
Hardened arch bit
(EC)
Hardened drill bit with optimized geometry for uncon
solid
dated soil
with small boulders.
Tungsten carbon arch bit
(ECC)
TC drill bit with optimized geometry for soft to medium rock formations.
Hardened drop center bit
(EY)
Hardened cross bit for loose to medium dense ground conditions
TC drop center bit
(EY)
TC drill bit for soft to medium rock formations.
Casting clay bit
(EW)
Casting clay bit with optimized geometry for very soft to soft caly.
Machined steel bit or Casring steel bit
The sacrificial drill bit is an important part of the self drilling anchoring system.
Choose suitable bits according to different soil type.
Anchor Nut
R25N
R32N
R32S
R38N
R51L
R51N
T76N
T76S
Key size
(mm)
41
46
46
50
75
75
100
100
Length
(mm)
135
45
45
55
70
70
80
80
Weight
(kg/pc)
0.25
0.35
0.35
0.5
1.55
1.55
3.6
3.6
Machined steel nut or casting steel nut
The hexagonal and spherical nuts are made from high precision steel (40Cr,HRC 20-25) to meet the stringent demands on anchor specifications and the daily uses of reinforcement work.
All nuts exceed the ultimate strength of the rod.
T-Thread Anchor
Rod
Technial Data
Bar Type
Outside Diameter
(mm)
Inside Diameter
(mm)
Cross section
(mm2)
Ultimate Load
KN
Yield Point
KN
Weight
(kg/m)
Thread Left/
Right Hand
30/11
30
11
446
320
260
3.3
Lift or right
30/14
30
14
395
260
220
2.9
Lift or right
30/16
30
16
382
220
180
2.7
Lift or right
40/16
40
16
879
660
525
7.0
Lift or right
40/20
40
20
726
539
430
5.6
Lift or right
52/26
52
26
1337
929
730
10.0
Lift or right
73/53
73
53
1160
1630
970
12.3
Lift or right
73/56
73
56
1094
1414
785
11.1
Lift or right
73/45
73
45
2265
1630
1180
17.8
Lift or right
T thread anchor bar surface with a trapezoidal thread, this design of connection is much stronger and reliable when compared with rope thread, we supply full sizes from T30 to T103.
Thread size: T30, T40, T52, T73, T103, T127, T130.
Thread standard: ISO10208, ISO1720 etc.
Product And Factory Display
Product Test
Technology Process
The Self Drilling Anchor system is comprised of a hollow threaded anchor bar with a sacrificial drill bit that performs drilling,anchoring and grouting in a single operation. Self drilling anchor system is mainly used in slope stabilization, tunneling pre-support, foundations with micro piles etc projects.
1. Connect the alloy drill and anchor rod one end, on the other end, connect the drill sleeve and shank adapter,
then connect the drilling rig or hand-held drill. Then start drilling, fill the cooling water while drilling.( If you want to lengthen the anchor rod, can connect the coupling, and then drilling)
2. Take down the drill, put the stop-grouting plug into the rod, and insert it to the hole,
then ready to grout. Special circumstances like surrounding rock grouting tension is over or surrounding rock is too broken, can use anchor agent to seal the hole.
3. Connect quick grouting coupling and anchor rod end, connect other end of grouting machine.
4. Start grouting, when grouting full and reach design value then power off. Grouting pressure according to the design parameters and grouting machine performance determine,
Cement/sand reference values is 1:0 ~ 1:1, water/cement reference value is 0.45:1 ~ 0.5:1.
5. Install anchor plate and nuts, and tighten nuts.
Application Scope
During the constructions of underground works, it is very common to encounter soft rock, fractured zone and large deformation due to high ground stress. In the case of serious collapsing, extra-long anchor is needed instead of ordinary one.
Packaging & Shipping
The packaging is packaged in tarpaulins and wooden boxes to ensure that it will not rust and corrode in the process of encountering water.
FAQ
Q:What are the shipping ports?
A:Under normal circumstances, we ship from Tianjin, Qingdao ports, you can choose other ports according to your needs.
A:Prices vary from period to period due to cyclical changes in the price of raw materials.
A:In general, our delivery time is within 7-45 days, and may be delayed if the demand is extremely large or special circumstances occur.
Q:Can I go to your factory to visit?
A:Of course, we welcome customers from all over the world to visit our factory.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.
The Self Drilling Anchor system is comprised of a hollow threaded anchor bar with a sacrificial drill bit that performs drilling, anchoring and grouting in a single operation. Self drilling anchor system is mainly used in slope stabilization, tunneling pre-support, foundations with micro piles etc projects.
Advantages and Characteristics as below:
1. No casings required, because anchor bars can be drilled into loose soils without needing casings to support the boreholes.
2. Fast drilling and installation, because drilling, installation and grouting are in a single operation.
3. Both rope threads and trapezoid threads are robust and ideal for rotary-percussive drilling and ensuring a high level of bond with the borehole gout.
4. The hollow core not only serves for flushing during drilling, but also for grouting after drilling.
5. Continuous threads ensure the bars can be cut and coupled at any point, or extended.
6. Different anchor bits are available for different ground conditions.
R thread anchor bar or called rock bolt, soil nail, which is a kind of threaded hollow bar, bar surface with an rope thread according to ISO 10208 & 1720. It was firstly invented by MAI on 1960S to solve the low construction speed on complicated underground works, nowadays; it is very popular all around the world.
Size
O.D(mm)
I.D(mm)
Ultimate Load(KN)
Yield Load(KN)
Weight(kg/M)
R25N-14
25.0
14.0
200
150
2.3
R32L-22
32.0
22.0
210
160
2.8
R32N-21
32.0
21.0
280
230
2.9
R32N-18.5
32.0
18.5
280
230
3.4
R32S-17.5
32.0
17.5
360
280
3.5
R32S-15
32.0
15
360
280
4.1
R38N-21
38.0
21.0
500
400
4.8
R38N-19
38.0
19.0
500
400
5.5
R51L-38
51.0
38.0
550
450
6.0
R51L-36
51.0
36.0
550
450
7.6
R51N-36
51.0
36.0
800
630
7.6
R51N-33
51.0
33.0
800
630
8.4
Steel grade
Acc. to EN10083-1
Thread direction
Left hand
Thread standard
ISO 10208 / ISO1720
Are you interested in learning more about R Thread Self Drilling Anchor Bars? Contact us today to secure an expert consultation!